Product info

How to thicken FlexRock Roof Coatings™

THICKENING: When a thicker product is needed to fill cracks or build up, follow small batch instructions and use any of the pre-approved thick-eners to achieve the thickness desired. Thickeners include: hemp hurd, crushed walnut shells, fumed silica, crushed polyethylene, and powdered polystyrene. Thickening agents can be purchased at local paint stores. Watch this video [...]

By |2021-11-04T08:10:54-06:00November 4th, 2021|, |Comments Off on How to thicken FlexRock Roof Coatings™

Roof Surface Preparation

A thoroughly cleaned roof is critical for a long-lasting application. 1. The owner/installer must prepare the substrate for the roof by addressing all of the conditions outlined in this document. Examine substrates to receive new roofing. Please do not proceed with the FlexRock Coating installation until unsatisfactory conditions have been corrected appropriately. 2. Make sure [...]

By |2021-11-04T07:39:52-06:00November 4th, 2021|, |Comments Off on Roof Surface Preparation

Where should reinforcement polyester fabric be used?

Blisters/Splits: To repair large splits/blisters, use polyester Reinforcing fabric 1/16″ thick in three layers and spread 2″ to 4″ beyond the split/blister area. Flashing details, penetrations, and curbs, FlexRock Coatings 1/8″ thick shall be applied over the substrate. The edges of the coatings shall be feathered for the water to flow over the flashing details. [...]

By |2021-11-04T07:35:19-06:00November 4th, 2021|, |Comments Off on Where should reinforcement polyester fabric be used?

What are the storage recommendations for FlexRock Coatings Base?

It is recommended that Part A be stored at room temperature. No less than 32°F (0°C). The Part A bucket should be stored upside down for ease of mixing when used. Turn bucket upside (minimum. one day) before use. Recommended Part B be stored at temperatures between 75° to 105°F (24° to 41°C). Products must [...]

By |2021-01-26T18:25:14-07:00December 16th, 2019|, , , , |Comments Off on What are the storage recommendations for FlexRock Coatings Base?

Title

Go to Top